How To Wire A three Way Switch

Ceiling Fan With LightSave heating and cooling costs by replacing an existing light fixture with an power-efficent fan/light mixture. Exiting the switch from a traveler terminal it then returns to the light box, but is merely spliced to one more wire that goes to a traveler terminal on the second switch. 1 wire connects to the ceiling fan, when the other connects to the light socket. Cables need to be run into the light box, involving the two switches, and from the light box to just 1 of the switches. You can search for a particular on ceiling fan light kit if you do some comparison shopping.

If you have access from above, you can make and install your own assistance brace using a length of 2×4 lumber nailed to the ceiling joists on each sides of the box location (Image two). Position the brace straight above the ceiling box. Because mounting a fan too close to the ceiling restricts air circulation, an extension rod of any length is usually advised.

If the switch is up (keep in mind our assumption above?) it will exit the switch on the proper hand traveler terminal and continue on the red wire back to the traveler terminal on the very first switch. When the switch is flipped the other way that connection is broken, and the prevalent terminal is then connected to the other traveler terminal. There are quite a few possibilities for techniques of receiving the right wire to the suitable spot but in each and every case the actual wiring has the same impact and utilizes the very same concept – if that impact and notion is recognized the process becomes a lot easier.

Any of the diverse strategies of wiring a 3 way switch shown right here can be employed interchangeably in old operate they merely indicate various techniques to run the important cables. Although I can not speak directly to the Hampton Bay ceiling fan model you are interested, soon after the ceiling fan for nearly 20 years, I have not noticed handheld transmitter for a remote – Ceiling fan is Sun high quality. This can result in a lot of wires in this box, but can be useful when the light is close to the first switch box. Attach the rod to the fan motor, and secure the ball mount at the upper finish of the rod.

That wire is spliced to a white wire in a two rope cable that goes to the initially switch box (not the switch) where it is spliced to the white wire in a 3 rope cable and continues on to the second switch, at the prevalent terminal. Each and every switch, as properly as the light fixture, need to have a ground wire terminated to it. The only exception is older residences that do not have ground wires in the boxes if there is a ground wire in the box it should be terminated on the switch and light.

Related Post