Because they are produced of metal, these ceiling tiles are impervious to numerous of the factors that could damage a typical, plaster ceiling. For the greatest circulation the blades ought to be at least 7 feet from the floor, and two feet from the ceiling. You can adhere to the simple directions that are under if you already have a light fixture in the ceiling. If access is possible above the ceiling exactly where the box is located it is a straightforward job to replace the present box with 1 rated for ceiling fans. Particular boxes are readily available for mounting by means of a hole in the ceiling they have expandable bars that will reach out to the joist on either side of the hole and by turning a nut on the bar will be pressed against and into the adjacent joists.
I was not going to invest hundreds of dollars to replace the ceiling fans, so I splurged on some paint. I just wrote a hub on a related subject in the world of ceiling fans, and would appreciate your feedback! Unlike plaster ceilings that can crack or warp with time and other factors such as moisture, a metal ceiling retains its shape and beauty for ages. Just recall to begin by turning off the light from the wall switch and removing the existing light fixture, leaving the outlet box in the ceiling with 3 wires- black, white, ground (green), and from time to time blue.
That all changed when Decorative Ceiling Tiles started offering a full line of metal tiles on the web that appear just like the originals but can match just about any price range and are easy to install. Eliminate the blades from the mounting brackets and lay them individually on a flat surface to see if there’s even the slightest bit of curve. If the fan blades are not spinning then it is most probably a difficulty with the electrical system.
Adequately finished, metal ceilings are impervious to moisture as nicely as the mold and mildew it causes, which adds to their durability. The old box must nevertheless be removed by either breaking it apart with a screwdriver and hammer or prying it away from the ceiling joist, leaving any wires above the ceiling. Although the blades do move the air, you also need to have to look at the width of the blade, the pitch, the speed, and the motor. Generate an complete ceiling from panels of corrugated metal to dress up an otherwise drab space. Metal ceiling tiles have the great advantage that they can be finished to suit any current décor.
Overall, the ease of installation and beauty of these tiles make them ideal for renovations. The outlet box and its help must be in a position to assistance the moving weight of the fan (at least 35 lbs). Any upper trim is normally installed at this time, and the fan is prepared for the fan blades to be installed. Once you have picked out your ceiling fan, and you currently have a light fixture in the ceiling.