The Most Common Types of Foundation Repair
The most petrifying home repair home owners might encounter will probably the problems with their house foundations. If you need to replace your roof, it is not that hard; but the foundation is literally a whole different side. After all, your foundation serves as the main support of your house. When it comes to this problem, it is usually caused by one thing -water. This is the mere reason why you really need the help of Foundation Repair Contractors when addressing this home repair issue.
Moreover, the methods used in repairing the foundations may vary, this depends on the site condition and geographic area for the repair. Until the late 1970s came, the most used simple method is using a concrete for the repair. So, below is a list of some of the most common foundation repairs in these days.
Firstly, we have the Helical Piers. Helical Piers are made to work well with interior slab repairs and exterior foundation repairs. Helical Piers are also useful as a repair method or even for a new construction. Also, helical piers are best matched by light loaded areas such as structures with vinyl siding or porch columns. Helical Piers are the most underused and adaptable pier in the market.
Second, we have the Steel Piers. The launching of the steel piers actually restructured the process of foundation repair. The steel piers take less time and disturb less landscape when implemented as compared with the traditional concrete piers. Steel Piers have now advanced and have become more scientific to implement.
Third is the High Density Polyurethane Foam. Slab mending is now simplified with High Density Polyurethane. In here, insertion or injection of the foam in a checkerboard grid that is approximately 7 feet on the center of the moved area happens. Also, High Density Polyurethane has now become popular in the market because of the price and repair speed it offers. But the thing is, the consumers must also remain cautious and careful if the Heating, Ventilation, and Air Conditioning ducts runs through the bottom because the foam might enter and obstruct them. To ensure that there are no leakage in the supply and drain lines, the consumers must also perform plumbing tests prior to the foam injection.
Fourth is the Concrete Pier Foundation Repair. Pour in place concrete piers are typically used by the foundation repair contractors in the initial construction phase of structures. However, these can also be used in foundation repairs. This was the best method of foundation repair before the introduction of the hydraulic driven steel pier.
Last is that we have the Segmented Pier. This is relatively one of the latest existing products in the industry. It is a well liked foundation repair product since it is not that expensive.
