Sally Edwards needed to replace some ugly acoustical tiles that hid plumbing in the ceiling of her early 20th-century Virginia farmhouse. If you still want to use the wall switch that controls the outlet, you will will need to wire from the outlet to the new fan, or possibly re-wire the outlet, coming from the fan very first to the outlet. Motor housings might be sealed to preserve moisture out and blades are generally created of plastic or a synthetic material that will not warp in the humidity. If it’s not, you will need to replace it with a metal box or an expandable bracket.
It was in. I’ve considering that decided that I don’t like shiny and bright staring down at me from the ceiling. Before installing your ceiling fan, shut off electricity at the key switch or circuit breaker in order to steer clear of electrical shock. Obtain ceiling fan weights at your regional house improvement retailer and use them to balance out the blades.
To reduce the danger of fire, electrical shock, or individual injury, wire connectors provided with your ceiling fan are created to fit specific gauge property wires, so you are going to want to make certain that you property wires are larger than the specified wire gauge or you have a lot more than one house wire connected to the 2 fan lead wires, consult an electrician.
Verify to make sure blades are at least 30 inches from any obstruction and check to guarantee that the blades are at least 7 feet from the floor. Harbor Breeze ceiling fans are so uncomplicated to set up that most Do-It-Oneself property owners are capable to have them up and running in significantly less than an hour. From the attic side, remove the box from the rafter or joist it is nailed to, and replace with a new box developed for a ceiling fan. The only drawback was we found one particular of the welds inside the metal casing had detached from the metal.
Ahead of utilizing a variable speed switch, check with the guide book that comes with your new ceiling fan to find out if it supports a variable speed switch so to protect against the threat of fire or electrical shock. Step 10 – Attach the fan blades to the mounting brackets with the screws offered, then attach the blades to the motor housing, also with the screws supplied.
