Metal CeilingNew decorative molding to finish off the edge of the tiles utilized for backsplash. Anytime a ceiling fan is to replace an ordinary light fixture, then, it is important to confirm that the box it is to be hung from is rated for ceiling fans, and this usually suggests replacing the current ceiling electrical box, so lets start out there. Metal ceiling tiles are substantially lighter and less complicated to set up than regular plaster ceilings.

After you discover this location, you will need to have to get up in the attic, and locate where your spot is. You want to make positive your place is between 2 trusses, so that you can install the suitable hardware and the help will be there to handle the weight of the fan. Replaced a fan we had devoid of a light that was currently wired correctly, so extremely simple to put up. Really quiet as well. Ahead of you commence installing the fan make sure to disconnect the power by removing fuses or turning off circuit breakers. A piece of half inch or thicker plywood fastened to the joists will hold your fan.

Make sure the installation web-site you select makes it possible for a minimum clearance of 7 feet from the blades to the floor and at least 30 inches from the ends of the blades to any obstruction. It could be easier just to find a hot wire in the attic that is close to the location exactly where you want to set up the fan, and employing a junction box, splice onto the current hot wire with some 14/2 romex and run this to the new fan outlet box. Before assembly the bearings in your ceiling fan are oiled and then encased, along with the motor, in a housing.… Read the rest