Basement Finishing – License to Create!

Basement Finishing - License to Create!

So you’ve spent months, or perhaps years, carefully wishing, planning, budgeting, measuring, drawing, as well as bidding your basement finishing project and you are almost willing to start the business. One aspect in your basement finishing you possibly will not consider yet is: “should my contractor be licensed?”

This is probably not this easy question. Some states require licensing; other states without these requirements have counties and/or cities that require licensing, other places have no licensing requirements whatsoever.

You may reside in a place like ours, where it is perfectly legal for an unlicensed contractor to drag a permit for your basement finishing project. On the flip side, your area may necessitate licensing, but you will find many contractors who’re unwilling or unable to comply.

So the question again becomes: “should my contractor be licensed?”

In a word… YES!

Several years back I met a contractor, who somewhat brazenly bragged about working across town without a license and even pulling a permit. I’m sure it wasn’t a coincidence that when discussing a few of his jobs, he joked: “I know it’s nice, ’cause I did it twice!”

There are many extremely important reasons you need your contractor licensed.

First and foremost, to obtain a license your basement finishing contractor must pass a test to show mastery of specific building codes and practices. The building is often complex business and carrying it out incorrectly brings about massive headaches and stress. A licensed contractor has proved that they get the knowledge to create correctly.

Second, most places need a license to pull a permit. Your basement finishing project must be inspected from your municipality for compliance with building codes. These inspectors are there to ensure that the contractor is doing his be effective. Their approval of the effort is needed to close out a permit.

Third, many licensing authorities require your contractor to prove his experience before obtaining his licensing. This often requires notarized statements of satisfaction from past customers or another verification that he has on-the-job experience of performing it he wishes to be licensed for. In this way, a license is a customer testimonial.

Last, complying with the local ordinance is one kind of many indicators you ought to seek out that the basement finishing contractor is often a trustworthy person who you need in your home.

Hiring a licensed basement finishing contractor doesn’t need to cost extra — along with the benefits are plain to find out. Before starting assembling your shed, make sure your contractor carries a current license. It’s a choice you will not regret.

Building more……

Read more

Basement Finishing – How to Avoid the Green Stuff

Basement Finishing - How to Avoid the Green Stuff

When I’m not associated with basement finishing projects or one of my other various pursuits, I’m usually getting together with my children. If yours are (or were) anything like mine, you understand they merely can’t stand the green stuff. It didn’t matter what sort of vegetable it had been if it turned out green you weren’t getting hired in that room.

Well, there’s a few other green stuff you should watch out for; especially when you’re about to find a basement finishing project! Years ago, when the tile was installed in a shower, they’d tile right over the plaster or drywall. It eventually became apparent until this wasn’t a durable solution as water invariably got behind the tile caused the backer to mold and deteriorate.

The next generation of shower wall backer-board was essentially drywall, though a mold and water-resistant paper. This product is still used by many today, but that may be a mistake. The board could be mold-resistant (which is good), in our basement finishing experience, water-resistant is just too strong an announcement. Any shower wall backer board will eventually get wet, along with the material behind the green paper that may deteriorate.

A good wall substrate has to resist water whether it gets wet (because eventually, it’s going to) and has got to shed any water that comes from the grout right down to the shower or tub below it. A cement board like Durock can this function a lot better than the rest. It can be completely saturated in water for extensive periods and won’t breakdown, and yes it sheds water to the shower or tub below it extremely well.

Not only is this kind of product extremely effective for walls, but normally a bathroom in the basement finishing project may have a seat or bench inside. The bench seat is of course not a vertical surface as being a wall. While it is angled, it can’t shed water you’d like an entirely vertical wall. Using a cementitious product like Durock for the seat surface will resist any potential water that comes from the grout, and is also an excellent step towards quality within your basement finishing project.

Few homeowners want their basement finishing efforts to get wasted. A superior backboard within your tile areas doesn’t cost a lot more than a lesser product and can last where others may not. A backer board like Durock is often a quality decision you must not ignore. It will help your basement stand test of your energy.…

Read more

Steps For Maximizing Your Money in New Home Construction – Avoiding Storage Pitfalls

Steps For Maximizing Your Money in New Home Construction - Avoiding Storage Pitfalls

“I like my money right where I can see it…hanging inside my closet,” says Sara Jessica Parker. In new house construction, money hanging inside your closet starts with taking advantage of the structure contractors storage allowance. Shelving and closet allowances tend to be overlooked and after that added being an afterthought causing financial and emotional stress on the property buyer. How difficult would it be to advance in a home without shelving or hanging capabilities in the closets or pantries? Important steps to consider are: 1) engage with your builder regarding all storage space requests; 2) enquire about the allowance for storage spaces, and 3) discuss the different storage options including builder preferences.

Discuss using your builder any special requests you will probably have for all your storage areas for example drawers inside the closets, pull-outs or baskets inside the pantry and extra shelving inside the garage. By adding all the special details and order inside the beginning stage of construction your entire project will run more smoothly and it is more affordable by eliminating last-minute decisions.

Before the designated time for you to finish the storage areas, it is usually smart to ask the builder or contractor what type of goods are being budgeted on your project. Since there are many storage variations and numbers of quality to think about, the builder may have a preference. Often the contractor will select the lowest-priced storage option. To get essentially the most bang on your buck, it is essential to communicate in your contractor your requests so that you can adequately meet your storage needs.

If you happen to be unsure about your storage needs or perhaps the cost of the special details you are considering, it would be useful to consult a specialist closet and storage designer. These professionals are available by looking inside Yellow Pages under “Closets” or by surfing the Internet. Designers are around to explain different products and methods to maximize your storage areas. Their expertise and experience can show you all over the country process and assist in avoiding costly mistakes. We all know that time is money. A costly mistake will be taking the time for it to rework the storage area or areas as a result of inadequate products and improper planning.

Storage areas are an important part of the house construction but can be overlooked within the budgeting process. Keeping the above tips in mind once you start to plan for first-time construction will hopefully eliminate any expensive mistakes. Communication is vital to a successful building project.…

Read more

Steps In Home Construction

Steps In Home Construction

When you choose to use a house built, watching the home construction process maybe like watching an amazing show. People who’ve never built their unique buildings will likely be awed by everything that goes into turning a dream into reality. Watching builders and contractors you could make your home sweet home from blueprints is similar to watching a kid being born. Except, in the birth of a kid, as miraculous since the tot maybe, how she or he ends up is a roll with the genetic dice. With a home, owners arrive at plan every last detail with architects and designers. When the building rises from your ground as planned, it’s a rewarding endeavor. Here are some with the steps involved with transforming your custom-built house dream into a reality:

Getting The Lot Ready For Building

Individuals often choose a patch of land where to start their property construction. Before laying the inspiration, the terrain will have to be prepared. This includes leveling, moving earth and preparing grading, drainage, as well as any underground components. If it’s a virgin plot, electricity, and plumbing will need to be sent from the municipalities on the lot.

Laying The Foundation

Having a great foundation is essential. This is usually a slab of cement poured into the dimensions from the floor plan. Once the cement is dried, it’s exciting for your homeowners-to-be to steer on top of it. They’ll probably run around saying “here’s my room,” or “this is where your kitchen will be.” They imagine living their life inside their future home with this very slab of cement.

Framing The Walls

As when the cement foundation wasn’t exciting enough, watching the framers hammer in the boards that shape the walls is downright thrilling. If a person has not seen a house or building being constructed, it’s interesting to check out everything that lies unseen within the drywall. Wires will probably be run; pipes will likely be placed for plumbing; ductwork for the HVAC systems will be installed. Taking photos of this stage is going to be a good way of remembering where things are underneath the finished product. During this phase, insulation batting could be added, at the same time, followed by wallboard and drywall.

Painting & Finishing Touches

Once the within and outside are constructed, there is going to be painting from the walls, ceilings, exterior and trim. Homeowners who chose each of the color combinations will be able to see the way the house will truly look. Lights, fixtures, and appliances will be placed as soon as the painting is done. Every fixture and appliance which is installed may have been handpicked by this homeowners-to-be. A person almost certainly won’t realize each of the details that comprise a building until she or he has was required to pick them out individually. After this process is fully gone, every house or building is going to be viewed through different eyes.

After months, the homeowners’ new house will be standing on their lot. …

Read more

Home Construction Uncensored

Home Construction Uncensored

My cellular phone is capable of every little thing, from GPS directions to star-charting, digital pictures, video…. and today my iPhone actually predicts me.

So why can’t Americans build re-build stronger/better homes so they can survive the storms, floods, mold wood rot, etc. If the climate is getting worse every decade why aren’t the house construction techniques keeping up?

Remember the story of The Three Little Pigs? The crew of pigs built house # 1 beyond straw, house # 2 beyond sticks, then on house # 3 they used bricks – looking to outsmart the big bad wolf who kept destroying their houses. We could all learn something from those 3 little piggies- which is it pays off eventually to look at time to make a house right.

Some in the homes built after Hurricane Katrina where created to withstand higher wind loads and to be more mold resistant which is s good start. When you live along the coast why aren’t house already built to withstand category 5 storms and on some kind of pilings to hold the structure off grade level and outside the damaging water? This could be building smart.

Building homes in relationship for the specific region and climate will be another smart move to make. Home construction will not be “one size fits all”. In low flood plain or areas prone to flooding, how come we building homes with basements that aren’t properly drained or protected from the ceaseless moisture? Seems in my experience it might make more sense not to develop a house with basements in areas that flood regularly. In regions that fire wildfires are regular along with frequent droughts, why aren’t we building fireproof homes and earn it part of the International Residential Building Code to have all building material fire resistant?

Codes, codes, codes; you’ll find hundreds and hundreds of them already. Why can’t we cause them to become sufficiently strong and earn the codes enforceable by inspectors when the construction is going on? Many houses are made in regions which were devastated by tornadoes along houses developed with connections that failed to fulfill the minimal code. These connections would never holdup to the incredible wind load from intense storms.

It’s very basic in my experience. Don’t just compensate for the same kind of material with the same old technique but build stronger, better, better, that will have a licking and on ticking?

Is it that hard to build a house that’s fireproof, mold resistant, and does not rot? This country sent a male for the moon over 40 years ago, and also the same country makes my cellphone much smarter than me and all my friends combined. So why can’t we build homes that wont burn, won’t flood, and won’t blow down? I know we are able to build affordable homes suitable for extreme weather, using products and techniques that can ensure every homeowner is going to be risk-free when Mother Nature comes-a-calling.

We need to develop for tomorrow, not …

Read more